In my case, when the filter is in place all the time, traps are not strict enough, how I can squeeze?
In my trap when the filter is in place all the time, traps are not tight enough, how I can squeeze? It's a trap Ludwig Accent CS Ludwig drum kit, and every time you pull the screen up all the way, the traps are too tight on the head down so that some lilttle Raddle and pressing the drum lightly, traps do not respond as they seem to have gone.
Loosen the screws holding the strings of the strainer or a child or plastic ties securing the strainer. Of opposite preference is the lever. The lever on the screen must have an adjustment screw can be tightened. Tighten until the end. Be sure to loosen the screws after holding the filter. Open the filter in the return lever position of the drum and put the strainer on the snare (bottom) head. Pull the filter or son or plastic beads to take up slack and tighten the flange screws. Make sure the filter lever remains in the open (off). It is possible that band lever in the OFF position because there will be no tension to hold it in place. Turn the drum upright again. You should now have the flexibility to adjust more. You can loosen the filter by loosening the lever and tighten your preferences. Good luck!
Snare Drum Head Tuning – JOEDRUMS
[affmage source="ebay" results="100"]Snare Strainer[/affmage]